[RETRACTED] Application of ANFIS for analytical modeling of tensile strength
of functionally graded steelsAbstract
In the present study, the tensile strength of ferritic and austenitic functionally graded steels produced by electroslag remelting has been modeled. To produce functionally graded steels, two slices of plain carbon steel and austenitic stainless steels were spot welded and used as electroslag remelting electrode. Functionally graded steel containing graded layers of ferrite and austenite may be fabricated via diffusion of alloying elements during remelting stage. Vickers microhardness profile of the specimen has been obtained experimentally and modeled with adaptive network-based fuzzy inference systems (ANFIS). To build the model for graded ferritic and austenitic steels, training, testing and validation using respectively 174 and 120 experimental data were conducted. According to the input parameters, in the ANFIS model, the Vickers microhardness of each layer was predicted. A good fit equation which correlates the Vickers microhardness of each layer to its corresponding chemical composition was achieved by the optimized network for both ferritic and austenitic graded steels. Afterwards; the Vickers microhardness of each layer in functionally graded steels was related to the yield stress of the corresponding layer and by assuming Holloman relation for stress-strain curve of each layer, they were acquired. Finally, by applying the rule of mixtures, tensile strength of functionally graded steels configuration was found through a numerical method. The obtained results from the proposed model are in good agreement with those acquired from the experiments.
chemical concentration profile; microhardness; tensile strength; ANFIS; ESR; ferritic FGS; austenitic FGS
Due to the high level of similarities with others papers published in the literature by the same research group, Materials Research, based on report by a Scientific Comittee, decided to retract the paper:
Nazari A. Application of ANFIS for analytical modeling of tensile strength of functionally graded steels. Materials Research. 2012; 15(3):383-396. https://doi.org/10.1590/0034-7167-2020-1266 https://doi.org/10.1590/S1516-14392012005000038.
Prof. Dr. Luiz Antonio Pessan
Editor-in-Chief
