Table of contents
Ciência Florestal, Volume: 34, Issue: 3, Published: 2024Ciência Florestal, Volume: 34, Issue: 3, Published: 2024
| Documents |
|---|
|
Articles Diagnosis and strategies for water spring conservation or restoration in environments under anthropic pressure Silva, Michele Aparecida Pereira da Evangelista, Laís Pinheiro Silva, Wallison Henrique Oliveira Santo, Fábio da Silva do Espiríto Abstract in Portuguese: RESUMO A conservação e restauração da vegetação nativa no entorno de nascentes são de suma importância para garantir e manter a qualidade e quantidade dos recursos hídricos, possuindo caráter protetivo nas premissas legais do novo Código Florestal Brasileiro. Nesse contexto, objetivou-se neste estudo diagnosticar e propor ações de conservação ou restauração da vegetação nativa nas Áreas de Preservação Permanente (APPs) de dez nascentes localizadas em ambientes com intensa ação antrópica (urbanização e mineração) na microbacia do Córrego de Fechos em Nova Lima - MG. A partir de análises in loco, foi realizado o diagnóstico ambiental das nascentes e seu entorno, sendo este baseado em diversos parâmetros, tais como: formas de uso do solo, estado de conservação da vegetação arbórea, regeneração natural, serapilheira, ocorrência de invasoras e estado de conservação do solo. A definição das melhores alternativas de restauração florestal foi realizada a partir da aplicação da chave analítica de Brancalion et al. (2015). Dentre as nascentes avaliadas, 07 foram classificadas como pouco perturbadas, 02 como muito perturbadas e apenas 01 como degradada, não sendo registrada nenhuma nascente diagnosticada como conservada. Como estratégias de restauração, são indicados o favorecimento da regeneração natural de espécies nativas e o adensamento para aquelas nascentes classificadas como pouco ou muito perturbadas, sendo o enriquecimento indicado como uma estratégia adicional para as muito perturbadas. Quanto à nascente que se encontra degradada, é indicada a introdução de espécies nativas em área total, com necessidade de uso de elevada riqueza de espécies.Abstract in English: ABSTRACT The conservation and restoration of native vegetation around springs is extremely important to guarantee and maintain the quality and quantity of water resources, having a protective nature in the legal premises of the new Brazilian Forest Code. In this context, the objective of this study was to diagnose and propose actions for the conservation or recovery of native vegetation in the Permanent Preservation Areas (APPs) of ten springs located in environments with intense anthropic action (urbanization and mining) in the Córrego de Fechos microbasin in Nova Lima - MG. Based on on-site analyses, an environmental diagnosis of the springs and their surroundings was carried out, based on several parameters, such as: forms of land use, conservation status of tree vegetation, natural regeneration, litter, occurrence of invasive species and soil conservation status. The definition of the best forest restoration alternatives was carried out by applying the analytical key by Brancalion et al. (2015). Among the springs evaluated, 07 were classified as little disturbed, 02 as very disturbed and only 01 as degraded, with no spring being diagnosed as preserved. As restoration strategies, favoring the natural regeneration of native species and densification for those springs classified as little or very disturbed are recommended, with enrichment indicated as an additional strategy for those that are very disturbed. As for the spring that is degraded, the introduction of native species in the total area is recommended, with the need to use high species richness. |
|
Articles Spatial dependence of soybean cultivation, in a lowcarbon production system, integrated with eucalyptus forest Ratke, Rafael Felippe Aguilera, Jorge González Zuffo, Alan Mario Baio, Fábio Henrique Rojo Teodoro, Paulo Eduardo Yokota, Lidiane Arissa Viana, Paulo Roberto Nunes Ratke, Luis Paulo Tomaz Oliveira, Job Teixeira de Abstract in Portuguese: RESUMO Num cenário de mudanças climáticas, um produtor que decidisse investir em um sistema de integração Lavoura-Floresta, ao invés de investir na produção convencional, se beneficiaria. O presente trabalho, que é um modelo de agricultura de baixa emissão de carbono, teve como objetivo avaliar o efeito do sombreamento e a dependência espacial dos índices da cultura da soja em integração com floresta de eucalipto. O delineamento adotado foi o de blocos ao acaso com seis repetições e tratamentos compostos por diferentes distâncias horizontais sobre eucalipto (30, 34, 38, 42 e 46 m), em duas áreas distintas, uma com presença de eucalipto nas regiões norte e oeste e outra sem a presença do eucalipto na parte norte da área de cultivo da soja. Avaliaram-se os fótons fotossinteticamente ativos em quatro épocas diferentes, o estande de plantas, a altura de plantas e o índice de vegetação após 30 e 60 dias de germinação e por fim a massa de mil grãos e a produtividade. Como resultados, todos atributos apresentaram dependência espacial, exceto produtividade da soja. Como considerações finais, o espaçamento de 34 m entre os eucaliptos promove menor sombreamento. A maior produção média de grãos na área foi encontrada na presença de eucalipto nas laterais oeste e norte da área de cultivo.Abstract in English: ABSTRACT In a climate change scenario, a producer who decides to invest in a Crop-Forest integration system, instead of investing in conventional production, benefits. The objective the present work, which is a low carbon emission agriculture model, aimed to evaluate the effect of shading and the spatial dependence of soybean crop indices in integration with eucalyptus forest. The design adopted was that of randomized blocks with six replications and treatments composed of different horizontal distances about eucalyptus (30, 34, 38, 42 and 46 m), in two distinct areas, one with the presence of eucalyptus forest in the north and west phase and another one without the presence of eucalyptus in the northern part of the soybean cultivation area. Evaluated the photosynthetically active photons at four different times, the plant stand, plant height, and the vegetation index after 30 and 60 days of germination and finally the mass of a thousand grains and productivity. As a result, all attributes showed spatial dependence, except soybean productivity. As final considerations, the spacing of 34 m between the eucalyptus trees promote less shading. The highest average grain production in the area was found in the presence of eucalyptus on the west and north sides of the cultivation area. |
|
Short Communication Future trends for biodiversity in urban afforestation of São Paulo, Brazil: insights for the restoration decade Lino, Raimunda Antônia Ruiz, Mauro Silva Galhardo, Cassiano Nascimento, Ana Paula Branco do Ferreira, Mauricío Lamano Santos, Mario Roberto dos Abstract in Portuguese: RESUMO A cidade de São Paulo possui três viveiros municipais de distribuição de exemplares de plantas que atendem à demanda de seus projetos paisagísticos e o aumento da cobertura arbórea. Um deles (Manequinho Lopes) recebe mudas de árvores pelos processos de compensação ambiental contratados pela Secretaria Municipal do Verde e Meio Ambiente (SVMA). Este trabalho teve como objetivo avaliar o cenário da biodiversidade arbórea recebida entre julho de 2013 e julho de 2018 pelo viveiro Manequinho Lopes, como medida de compensação ambiental. Os resultados indicaram que 144.727 mudas de árvores foram recebidas pelo viveiro, com aproximadamente 80% do total pertencendo a apenas 30 espécies, sendo que metade delas pertencem a apenas 10 grupos diferentes. Encontramos apenas duas famílias predominantes: Myrtaceae e Bignoniaceae, evidenciando o futuro risco de homogeneização biótica. Em relação aos atributos ecológicos, constatou-se que 33% das espécies eram zoocóricas, 16% autocóricas e 22% anemocóricas. A maioria deles eram espécimes não ameaçados de extinção.Abstract in English: ABSTRACT São Paulo city has three municipal nurseries for the distribution of urban tree specimens that meet the demand for its public landscape projects and increase in tree covering. One of them (Manequinho Lopes) receives tree seedlings from the environmental compensation processes contracted with the Municipal Secretariat for Green and Environment (MSGE). This paper aimed to evaluate the scenario of tree biodiversity received between July 2013 and July 2018 by the Manequinho Lopes nursery, as a measure of environmental compensation. The results indicated that 144,727 tree seedlings were received by the nursery, with approximately 80% of the total belonging to only 30 species, half of them belonging to only 10 different groups. We found just two predominated families: Myrtaceae and Bignoniaceae, highlighting a biotic homogenization risk. Regarding ecological attributes, it was found that 33% of the species were zoochoric, 16% autochorous and 22% anemochoric. Most of them were non-endangered specimens. |
|
Review Article Influence of basic density and chemical composition of wood for the pulp industry: a case study Ramos, Rafaella Dias Longue Junior, Dalton Gomes, Fernando José Borges Medeiros, Natielly Cristine Gomes de Abstract in Portuguese: RESUMO Os gêneros Eucalyptus e Pinus representam as principais espécies madeireiras que formam as florestas plantadas utilizadas pelo setor de celulose no Brasil, e por isso muitos estudos são realizados correlacionando as características tecnológicas da madeira, as variáveis do processo de polpação e a qualidade da polpa celulósica. O objetivo deste trabalho foi realizar uma revisão bibliográfica sobre os estudos que relacionam a densidade básica e a composição química da madeira com as variáveis de processo de polpação e com as características da polpa celulósica. Foi utilizado o princípio do estudo exploratório por meio de uma revisão de literatura. Os principais estudos utilizados nesta pesquisa apontaram que os melhores clones de eucalipto utilizados na indústria de polpa apresentaram densidade básica entre 400 e 550 kg/m³ , rendimento em polpa não branqueada entre 45 e 55%, número kappa 17-18 e viscosidade da polpa marrom superior a 1200 g/cm³. Com relação aos melhores clones do gênero Pinus, estes apresentaram densidade básica variando entre 370 e 440 kg/m³ , menor que a variação verificada para o Eucalyptus; rendimento similar aos estudos com Eucalyptus, variando entre 45 e 51%; e número kappa 30-32, maior que o utilizado em cozimentos com madeira de Eucalyptus. Os resultados obtidos neste trabalho permitiram concluir que dentre as características da madeira, a densidade básica foi a mais utilizada nas indústrias de celulose para nortear o rendimento do processo, enquanto o teor de extrativos e relação S/G da lignina foi pouco apresentada pelas pesquisas.Abstract in English: ABSTRACT The Eucalyptus and Pinus represent the main woody species in planted forests used by the pulp sector in Brazil, and for this reason, many studies have been carried out correlating the wood technological characteristics and the pulp quality. The objective of this work was to perform a literature review about studies that correlate basic density and wood chemical composition with pulping process variables and pulp characteristics. The work followed the principle of an exploratory study, through a literature review was used. The main studies used in this research showed that the best clones used in the eucalyptus pulp industry had a basic density varying between 400 and 550 kg.m-3, a unbleached pulp yield varying between 45 and 55%, a kappa number of 17-18 and a viscosity of brown pulp over than 1200 g.cm-3 . Com relação aos melhores clones do gênero Pinus. Regarding to the best Pinus genus clones, they had a basic density varying between 370 and 440 kg.m-3, lower than the Eucalyptus variation; similar yield to the Eucalyptus studies, ranging from 45 to 51%; and kappa number of 30-32, higher than that used in cooking with eucalyptus wood. |
|
Articles Energy characterization of agricultural and forestry biomasses in the state of Pernambuco Ferreira, Sabrina de Oliveira Pinto Muniz Ferreira Júnior, Jorge Alberto Muniz Braz, Rafael Leite Abstract in Portuguese: RESUMO Tem se intensificado a busca por alternativas sustentáveis e menos poluentes, como o aproveitamento de resíduos de biomassa para fins energéticos, substituindo os combustíveis fósseis e derivados. O objetivo deste estudo foi avaliar o potencial energético de biomassas agrícolas e florestais para geração de energia. Além disso, determinar suas propriedades físicas, químicas e energéticas. Para realizar esta análise, utilizou-se cinco biomassas agrícolas e florestais de processos produtivos no estado de Pernambuco, são elas: bagaço de cana-de-açúcar, casca de eucalipto, cavaco de eucalipto, serragem de madeira e poda da arborização urbana do município de Recife. O bagaço de cana-de-açúcar (18.405 KJ/Kg), seguido pela serragem (18.115 KJ/Kg) e cavaco de eucalipto (18.024 KJ/Kg), obtiveram maior poder calorífico. Quanto à química elementar, o teor de hidrogênio foi o único que não apresentou diferença significativa entre as biomassas e o bagaço de cana apresentou os melhores valores de oxigênio e enxofre, além de alto teor de carbono. Em relação à densidade energética e ao IVC, o cavaco de eucalipto (6,16 GJ/m³ e 307, respectivamente) e a serragem (5,91 GJ/m³ e 32,86, respectivamente), apresentaram os maiores valores. Todas as biomassas avaliadas possuem potencial energético, porém, com base nas variáveis, o bagaço de cana-de-açúcar, a serragem e o cavaco de eucalipto tendem a apresentar maior combustibilidade.Abstract in English: ABSTRACT The search for sustainable and less polluting alternatives has intensified, such as the use of biomass residues for energy purposes, replacing fossil fuels and derivatives. The objective of this study was to evaluate the energy potential of agricultural and forestry biomasses for energy generation, as well as to, determine their physical, chemical and energetic properties. To carry out this analysis five agricultural and forestry biomasses from productive processes in the state of Pernambuco were used, namely: sugarcane bagasse, eucalyptus bark, eucalyptus chips, wood sawdust and pruning of urban trees in the municipality of Recife. Sugarcane bagasse (18,405 KJ/Kg), followed by sawdust (18,115 KJ/Kg), and eucalyptus chips (18,024 KJ/Kg), had the highest calorific value. As for elemental chemistry, the hydrogen content was the only one that did not show a significant difference between the biomasses, and the sugarcane bagasse presented the best values of oxygen and sulfur, in addition to high carbon content. Regarding energy density and IVC, eucalyptus chips (6.16 GJ/m³ and 307, respectively), and sawdust (5.91 GJ/m³ and 32, 86, respectively), presented the highest values. All evaluated biomasses have energy potential, however, based on the variables, sugarcane bagasse, sawdust and eucalyptus chips, tend to have greater combustibility. |
|
Articles Hydrogel associated with soil moisture levels in the cultivation of Eucalyptus urograndis Silva, Jonas Santos Braulio, Caliane da Silva Jesus, Daiana Souza de Leite, Elton da Silva Nóbrega, Rafaela Simão Abrahão Martins, Ricardo Previdente Nóbrega, Júlio César Azevedo Abstract in Portuguese: RESUMO Embora avanços tecnológicos tenham ocorrido no setor florestal brasileiro, ainda não há uma padronização quanto à quantidade de água a aplicar nas diferentes etapas de desenvolvimento das plantas, e de doses de condicionadores de umidade do solo, visando a redução do déficit hídrico em solos sob cultivo do Eucalyptus urograndis. Diante disso, objetivou-se avaliar o uso do hidrogel em Eucalyptus urograndis associado a níveis de umidade do Latossolo Amarelo distrocoeso. O estudo foi conduzido em casa de vegetação da Universidade Federal do Recôncavo da Bahia. Os tratamentos foram constituídos por quatro níveis de umidade no solo (50, 75, 100 e 125%), a partir da água disponível no solo, e quatro doses de hidrogel (0; 1,5; 3,0 e 4,5 g L-1), em delineamento inteiramente casualizado em esquema fatorial 4 x 4, com 16 tratamentos e 4 repetições. As variáveis avaliadas foram: altura (H), diâmetro do caule (DC), índices de clorofila A, B e total, massa seca do caule (MSC), massa seca de folhas (MSF), massa seca da parte aérea (MSPA), massa seca de raízes (MSR), massa seca parte aérea/massa seca raiz (MSPA/MSR), massa seca total (MST) e altura/diâmetro (H/DC). O uso de hidrogel aumenta a disponibilidade de água em Latossolo Amarelo distrocoeso e reduz o efeito do déficit hídrico na cultura. A dose de 3,0 g L-1 de hidrogel proporciona melhor crescimento e produção de fitomassa do Eucalyptus urograndis, quando o nível de umidade inicial do solo está em torno da capacidade de vaso.Abstract in English: ABSTRACT Although technological advances have occurred in the Brazilian forestry sector, there is still no standardization regarding the amount of water to be applied at different stages of plant development, and doses of soil moisture conditioners, modifying the reduction of water deficit in soils under cultivation of Eucalyptus urograndis. Therefore, the objective was to evaluate the use of hydrogel associated with soil moisture levels in Eucalyptus urograndis. The study was conducted in a greenhouse at the Federal University of Reconcavo of Bahia. The treatments consisted of four levels of soil moisture (50, 75, 100 and 125%), from water in the soil, and four doses of available hydrogel (0; 1.5; 3.0 and 4.5 g L-1), in a randomized design in a 4 x 4 factorial scheme, with 16 treatments and 4 replications. The evaluations evaluated were: height (H), stem diameter (DC), chlorophyll A, B and total indices, stem dry mass (MSC), leaf dry mass (MSF), shoot dry mass (MSPA), root dry mass (MSR), shoot dry mass/root dry mass (MSPA/MSR), total dry mass (MST) and height/diameter (H/DC). The use of hydrogel increases water availability in dystrocohesive Yellow Oxisol and reduces the effect of water deficit in Eucalyptus urograndis. A dose of 3.0 g L-1 of hydrogel provides better growth and phytomass production of Eucalyptus urograndis, when the initial soil moisture level is around field capacity. |
|
Articles Using drones for estimating fuel material in Cerrado grasslands Souza, Igor Viana Silva, Francisca de Cássia Silva da Batista, Antonio Carlos Santos, Gil Rodrigues dos Coelho, Maria Cristina Bueno Giongo, Marcos Abstract in Portuguese: RESUMO Em busca de alternativas para aprimorar o controle e gerenciamento das ações de prevenção aos incêndios, novas técnicas para quantificação do material combustível têm sido estudadas. Para reduzir os custos e tempo gasto em campo, o uso de sensores multiespectrais e câmera RGB (Red, Green e Blue) vêm se destacando como ferramentas úteis e eficazes na estimativa do material combustível. Nesse contexto, objetivou-se neste trabalho avaliar a viabilidade da utilização de um sensor multiespectral e câmera digital RGB aerotransportada por um multirrotor, para estimativa de carga de material combustível em área de Cerrado por meio de regressão linear. O trabalho foi conduzido em área de formação savânica, onde foram avaliadas 40 amostras de carga de material combustível em parcelas de 1 m², coletando-se também imagens, mediante a um aerolevantamento, para obtenção de variáveis de reflectância, índices de vegetação e variáveis descritivas do modelo tridimensional. A equação ajustada para prever o conteúdo de material combustível (MCT) na área de estudo revelou-se relevante, com significância estatística (p < 0,001), um coeficiente de determinação (R²) de 0,70 e R² ajustado de 0,65. Ao analisar a influência das variáveis no modelo, observou-se que, embora a densidade de pontos no modelo (DPM) apresentasse correlações superiores entre as variáveis, o índice de vegetação NDVI exerceu uma influência mais significativa, evidenciada pelo seu maior peso na equação ajustada.Abstract in English: ABSTRACT In the quest to advance fire prevention and control strategies, new techniques for quantifying combustible material are being explored. Among these, the use of multispectral sensors and red, green, and blue (RGB) cameras has emerged as promising solutions to streamline both cost and time expenditures in the field. This study aimed to assess the feasibility of employing an airborne multispectral sensor and an airborne RGB digital camera, mounted on a multirotor drone, to estimate combustible material load in a Cerrado area through linear regression analysis. Conducted within a savanna formation, the study involved evaluating 40 samples of combustible material load in 1 m² plots. Aerial surveys were conducted to capture images, facilitating the derivation of reflectance variables, vegetation indices, and descriptive parameters of the three-dimensional model. The resulting equation, customized to predict total combustible material within the study area, exhibited considerable significance (p < 0.001), accompanied by a determination coefficient (R²) of 0.70 and an adjusted R² of 0.65. Upon analyzing the variables’ impact on the model, it became evident that while the point density of the model showed higher correlations, the normalized difference vegetation index wielded notable influence, as indicated by its prominent weight within the adjusted equation. |
|
Artigos Epiedaphic fauna in different agroecosystems obtained by Pitfall traps and Provid methods Silva, Jéssica Camile da Viceli, Jéssica Maiara Oliveira, Darlin Henrique Ramos de Rodrigues, Miriam Fernanda Kessler, Nathalie Caroline Hirt Tessaro, Dinéia Abstract in Portuguese: RESUMO Neste estudo, o objetivo foi avaliar a fauna epiedáfica em diferentes agroecossistemas utilizando dois métodos de coleta. Os organismos foram amostrados em quatro agroecossistemas: (i) cultivo de milho, (ii) cultivo de Brachiaria ruziziensis, (iii) sistema silvipastoril, e (iv) remanescente florestal secundário. Em cada agroecossistema, 5 armadilhas do método Pitfall traps e 5 do método Provid foram instaladas, espaçadas em 10 metros entre si e mantidas em campo por três dias. Os organismos coletados foram classificados ao menor nível taxonômico possível e os dados obtidos, avaliados pelos índices de diversidade de Shannon e de dominância de Simpson, e análise de componentes principais. O método Pitfall traps resultou em maior abundância da comunidade epiedáfica em relação ao método Provid. A área cultivada com milho teve maior abundância em relação aos demais agroecossistemas avaliados. Os melhores valores de diversidade foram observados no cultivo de B. ruziziensis, por ambos os métodos. As áreas de cultivo de milho e sistema silvipastoril foram separadas pelos dois métodos pela análise de componentes principais. O maior número de grupos da fauna epidáfica ocorreu na área cultivada com B. ruziziensis e ao remanescente florestal.Abstract in English: ABSTRACT In this study, the objective was to evaluate the epiedaphic fauna in different agroecosystems using two sampling methods. Organisms were sampled in four agroecosystems: (i) corn cultivation, (ii) Brachiaria ruziziensis cultivation, (iii) silvopastoral system, and (iv) secondary forest remnant. In each agroecosystem, 5 Pitfall traps and 5 Provid traps were installed at a distance of 10 meters and kept in the field for three days. The sampled organisms were classified at the lowest possible taxonomic level and the data obtained were analyzed using Shannon’s diversity and Simpson’s dominance indices, and principal component analysis. The Pitfall traps method resulted in greater abundance of the epiedaphic community compared to the Provid traps method. The corn cultivation area had greater abundance compared to the other agroecosystems evaluated. The best ecological index was observed in the B. ruziziensis crop, using both methods. The areas of corn cultivation and silvopastoral system were separated by the two methods, by principal component analysis, with a greater number of groups associated with the area cultivated with B. ruziziensis and the secondary forest remnant. |
|
Articles Floristic-structural heterogeneity of deciduous tropical forest on topographic gradient of limestone outcrop Zavala, Carmen Beatriz Reiss Pereira, Zefa Valdivina Linê, Jósimo Diego Bazanella Abstract in Portuguese: RESUMO Florestas tropicais deciduais sobre afloramento calcário possuem grande relevância ecológica e encontram-se ameaçadas, tornando necessários estudos para sua conservação e restauração. Objetivouse aqui avaliar a variação na composição e estrutura do componente arbustivo-arbóreo de uma floresta decidual em três áreas de um gradiente topográfico na Serra da Bodoquena. Foram amostradas 102 parcelas contíguas de 10 x 10 m (100 m2), sendo 34 parcelas por faixa de relevo, e área total de 1,02 ha. Foram incluídos todos os indivíduos arbustivo-arbóreos com PAP ≥ 10 cm e estimadas as alturas. Calcularam-se os estimadores de riqueza, os parâmetros fitossociológicos usuais e a diversidade. Os dados das variáveis foram ordenados em NMDS pelo coeficiente de Bray-Curtis. Como resultado, na área total obteveram-se 2.385 indivíduos pertencentes a 70 espécies, 49 gêneros e 29 famílias botânicas, com área basal de 25,44 m2/ha. A densidade foi crescente do topo para a encosta baixa. A diversidade e a equabilidade foram maiores no topo. Os diâmetros se concentraram na primeira classe, até 13,1 cm, e a média de alturas foi de 5,25 m, com predomínio de sub-bosque. Cinco espécies amostradas ainda não possuíam registro para a região. A análise de ordenação revelou maior distância das parcelas e espécies do topo do morro em relação às duas áreas de encosta. A composição e a estrutura indicaram a topografia como fator gerador das variações florístico-estruturais.Abstract in English: ABSTRACT Tropical deciduous forests on limestone outcroppings have great ecological relevance and are threatened, making studies for their conservation and restoration necessary. The objective of this study was evaluate the variation in composition and structure of the shrub and tree component of a deciduous forest in three areas of a topographic gradient in the Serra da Bodoquena. A total of 102 contiguous 10 x 10 m (100 m2) plots were sampled, with 34 plots per relief strip, and a total area of 1.02 ha. All shrubby-arboreal individuals with PAP ≥ 10 cm were included and heights were estimated. Richness estimators, usual phytosociological parameters, and diversity were calculated. The data of the variables were ordered in NMDS by the Bray-Curtis coefficient. As a result, in the total area we obtained 2,385 individuals belonging to 70 species, 49 genera and 29 botanical families, with a basal area of 25.44 m2/ha. The density was increasing from the top to the lower slope. Diversity and equability were higher at the top. Diameters were concentrated in the first class, up to 13.1 cm, and the average height was 5.25 m, with a predominance of understory. Five species sampled had not yet been recorded for the region. Ordination analysis revealed greater distance of plots and species from the hilltop compared to the two hillside areas. Composition and structure indicated topography as a factor generating floristicstructural variations. |
|
Articles Influence of sodium chloride concentration on the dimensional stability of Eucalyptus wood Arantes, Lorran de Sousa Borges, Ianca Oliveira Hein, Paulo Ricardo Gherardi Oliveira, Bárbara Maria Ribeiro Guimarães de Kuhn, Leonardo Seibert Carneiro, Daniella Dutra Miranda, Larissa Nara Nascimento de Vale, Hekiciellen Pamella Nunes do Mendes, Lourival Marin Guimarães Júnior, José Benedito Abstract in Portuguese: RESUMO Avaliou-se a influência da concentração de cloreto de sódio na estabilidade dimensional da madeira de Eucalyptus urophylla x Eucalyptus grandis. Foram utilizados 90 corpos de prova, na qual foram saturados em béqueres contendo água destilada (controle) e solução de cloreto de sódio com concentrações de 2,5% e 10%. Depois de saturados, os corpos de prova foram submetidos à secagem até atingirem massa constante. As dimensões dos corpos de prova foram determinadas para cálculo dos inchamentos e contrações radiais e tangenciais. Madeiras de Eucalyptus urophylla x Eucalyptus grandis impregnadas com solução de cloreto de sódio nas concentrações de 2,5 e 10% obtiveram valores de inchamento tangencial semelhantes ao do controle. Para o inchamento radial, as madeiras impregnadas com solução de cloreto de sódio na concentração de 2,5% atingiram menores valores. A concentração da solução de cloreto de sódio influenciou a contração tangencial e radial das madeiras de Eucalyptus urophylla x Eucalyptus grandis, pois menores valores foram encontrados para as madeiras impregnadas com solução de cloreto de sódio nas concentrações de 10 e 2,5%.Abstract in English: ABSTRACT Evaluated the influence of the concentration of sodium chloride in the dimensional stability of Eucalyptus urophylla x Eucalyptus grandis. It was used 90 samples, which were saturated in beakers containing distilled water (control) and sodium chloride solution concentrations of 2.5% and 10%. Once saturated, the samples were dried until constant mass. The dimensions of the samples were determined for calculate the swelling and radial and tangential contractions. Woods of Eucalyptus urophylla x Eucalyptus grandis impregnated with sodium chloride solution at concentrations of 2.5 and 10% obtained tangential swelling values similar to those of the control. For radial swelling, wood impregnated with sodium chloride solution at a concentration of 2.5% reached lower values. The concentration of sodium chloride solution influenced the tangential and radial contraction of Eucalyptus urophylla x Eucalyptus grandis woods, as lower values were found for woods impregnated with sodium chloride solution at concentrations of 10 and 2.5%. |
Read our Open Access Statement
